| Delivery form |
||||||||||||
| Neville Hydrocarbon Resins are normally available
in flakes packed in PE bags
of 25 kg net weight, for easy handling and storage. There are also possibilities
to pack the resin flakes with softening points
R&B over 100°C in 500 kg or 1,000 kg
big bags. The liquid Neville Resins are available in drums,
containers or tankcars. Resins can also be supplied
in melted form
or as resin solution in roadcontainers.
Following delivery forms are available: • Solid resins as flakes measuring several millimetres in thickness packed in 25 kg bags (net) or in big 500 kg or 1,000 kg bags. • Fluid resin in approx. 200 litre drums or 1,000 kg containers, or bulk in a (heated) tanker. • Resin solutions, e.g. resin in ink oil. • Molten resin in a heated tanker. Storage and handling Most hydrocarbon resins gradually oxidize, some more rapidly than others. It is therefore recommended to keep a tight stock control and to use as a fixed rule the principle ‘first in, first out’. Due to storage conditions, warehousing practices, and climate, some types of flaked hydrocarbon resins (with low softening points R&B) will remass (revert to a solid form). Because these variables cannot be controlled by Neville Chemical Europe, no guarantee, either implicit of explicit, is made by the manufacturer. Typical properties and test methods
The information given in this data sheet is based on our current up-to-date knowledge of the products. However, the details of properties, values, etc. stated should be regarded as a general indication only and consequently no specific guarantee is expressed or implied. Further information: For more detailed technical information, contact our technical service department or ask for other brochures in the following application areas at the sales desk: • printing inks • adhesives • coatings • rubbers These brochures can be downloaded from the web page “Brochures”.
|
||||||||||||